No announcement yet.

Honestly, I have a question about simple thing.


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Honestly, I have a question about simple thing.

    This picture is a part of Kegel Oil Machine lift. Rubber thing with strap. Please help me and let me know about that rubber part’s lifespan. Who's said to me ‘I’ve never seen that parts broken in my life.’but I ain’t agree, I don't think so. I knew my question is little bit of weird or stupid but I can't wait about the truth. Please tell me if you know about that parts. Appreciate~
    You do not have permission to view this gallery.
    This gallery has 1 photos.

  • #2
    Ours did that too, within the first year. I wrapped them with a couple zip ties and black tape to save them. We have a new strap kit waiting to be installed, the edges of our straps are quite frayed after about 2 years of use. I think I'll probably put a zip tie on the new ones too before they get a chance to start tearing.


    • #3
      Thank you very very much for replying me


      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...