No announcement yet.

Squeegy blades


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Squeegy blades

    I thought I seen somewhere on here where to buy cheaper squeegy blades other than from Kegal. Where can I order them and do they work just as good?

  • #2

    Heres a link were I discussed getting them.

    I found a local place to buy the blades $50 each
    The part # is E00601BLU or 56105542 not sure which one, but probably one of these is the actual APA Nilfisk Advance part #.

    You might be able to find these locally at Janitorial supply places. The type of place that sells supplies for floor cleaning machines. They may not have them in stock but they will probably be able to order them in for you. You can even try to contact Nilfisk Advance to find out where there is a nearby vendor to you

    Maybe try to contact the company to find a dealer near you


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

    Prolane damage

    Can this be repaired?

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...