Announcement

Collapse
No announcement yet.

OIls for wick machine

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • OIls for wick machine

    What type of oil do you prefer for a summit wick machine without heaters. Thinking of switching but do not know anything about other oils. Right now I am using reactor oil with formula acc cleaner with AMF HPL lanes.
    Sometimes we have to do stuff to get by....Just go back and do it right when the "by" has passed!!

  • #2
    Crossfire by Kegel

    Comment


    • #3
      AW22 from Brunswick is also an option.
      Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
      Cleaner: Fabuloso Spring Fresh with Bleach Alternative
      Cloth: ShamWow!
      Machine: Johnny 5
      Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Table cutting off before the end of the cycle

      I have one lane that has been giving me trouble lately. It used to be every once in awhile but now it is happening every cycle. Start 1st ball cycle, sweep drops does the usual...
       

      ETU diagnostic tool

      I've posted before about wanting to try and figure out how to fix these trigger boards we have. I'm trying to map the thing out and create a schematic, but it's slow going, especially...
       

      Gutter Straps

      Hey everyone, I hope someone can direct me in the right direction. I'm looking to find either a part number or someone willing to part with some.gutter straps. I have plastic...
       

      AMF 82-90XL BE Gearbox seals part number cross reference.

      I have spent a few hours cross checking part numbers for my 82-90xl's Back end gearboxes. I have found that most auto part stores carry these seals for a fraction of the price...
       

      Roller Clutch issue

      Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
       

      Another pivot bearing broke.

      One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
      Working...
      X