Announcement

Collapse
No announcement yet.

lane machine runs off pindeck

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kanga (James)
    replied
    "No she di'int" *SNAPS*

    Lol

    Leave a comment:


  • shamefowjze
    replied
    Originally posted by Kanga View Post
    What I was thinking.
    Cuz yo momma didn't raise no dummy

    Leave a comment:


  • Kanga (James)
    replied
    Originally posted by shamefowjze View Post
    Check the end to pindeck setting for each pattern.
    What I was thinking.

    Leave a comment:


  • shamefowjze
    replied
    Check the end to pindeck setting for each pattern. look to see if the LDS sensor is overriden. The distance is usually farther down the lane if it runs off the Tach only. You would most likely be getting travel errors if a sensor were bad and not overridden.

    Leave a comment:


  • Kanga (James)
    replied
    Does it do it for every pattern in the machine?

    Leave a comment:


  • rivmike
    replied
    Sounds like the lane distance sensor is bad. Have you changed anything lately? You may be able to reroute to another sensor, call Kegel at 1-800-280-2695.

    Leave a comment:


  • deleted2018-12-02
    started a topic lane machine runs off pindeck

    lane machine runs off pindeck

    i have a old elite that runs off the pindeck everytime?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X