Announcement

Collapse
No announcement yet.

lane machine runs off pindeck

Collapse

Adsense Classic 1

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    lane machine runs off pindeck

    i have a old elite that runs off the pindeck everytime?
    Tags: None
  • #2
    Sounds like the lane distance sensor is bad. Have you changed anything lately? You may be able to reroute to another sensor, call Kegel at 1-800-280-2695.

    Comment

    • #3
      Does it do it for every pattern in the machine?
      Factory & Converted A-2 (US, Ger, Jap)
      Comscore ECT, Matrix & DuoHD
      Walker B, Sanction Standard, Original K, Flex Walker & Ikon
      Kegel C.A.T.S

      Comment

      • #4
        Check the end to pindeck setting for each pattern. look to see if the LDS sensor is overriden. The distance is usually farther down the lane if it runs off the Tach only. You would most likely be getting travel errors if a sensor were bad and not overridden.
        Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
        Cleaner: Fabuloso Spring Fresh with Bleach Alternative
        Cloth: ShamWow!
        Machine: Johnny 5
        Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

        Comment

        • #5
          Originally posted by shamefowjze View Post
          Check the end to pindeck setting for each pattern.
          What I was thinking.
          Factory & Converted A-2 (US, Ger, Jap)
          Comscore ECT, Matrix & DuoHD
          Walker B, Sanction Standard, Original K, Flex Walker & Ikon
          Kegel C.A.T.S

          Comment

          • #6
            Originally posted by Kanga View Post
            What I was thinking.
            Cuz yo momma didn't raise no dummy
            Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
            Cleaner: Fabuloso Spring Fresh with Bleach Alternative
            Cloth: ShamWow!
            Machine: Johnny 5
            Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

            Comment

            • #7
              "No she di'int" *SNAPS*

              Lol
              Factory & Converted A-2 (US, Ger, Jap)
              Comscore ECT, Matrix & DuoHD
              Walker B, Sanction Standard, Original K, Flex Walker & Ikon
              Kegel C.A.T.S

              Comment

              Previous template Next

              Topic Starter RibbonScript

              Collapse

              Adsense Classic 2

              Collapse
              widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
               

              Rake sweeping out of time, and pin launching onto lane.

              I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
               

              Strange sweep problem

              I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
               

              GSX Distributor shaft bearings

              Two part topic:
              1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

              2. ANY of these bearings with the black support mount...
               

              The Legacy of the A2

              I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
               

              Table turning on short stroke.

              Hello dear Bowltech members.
              First let me say thank you for your time. am plagued by a big issue for three weeks now.
              our technician is working full time on another...
               

              Another pivot bearing broke.

              One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
              Working...
              X

              We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

              By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

              I Agree