Announcement

Collapse
No announcement yet.

doubts with the volume

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • doubts with the volume

    Hello everyone, I have a question, is there a way to convert the patterns designed for Kegel Sanction technology machines into patterns for Brunswick Direct + technology machines?
    Does the total volume of oil in both patterns have to be the same?
    Thanks for your help

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Worn LBS Rudder Cams

Can worn LBS rudder cams be rehabilitated? Anyone tried?

The edges on these are rounded over, which I think is preventing them from maintaining a good latch when...
 

Back after 10 years with my mini lane

Hey guys! After building my lane 10 years ago I had to relocate for work and could not take my lane. It has been in storage ever since. I finally was able to bring it down...
 

82/90 table too low at home position and hanging low on back right side

I am currently having some issues with my lane 5. The table is too low at the home position. This is causing pins to completely fall out when they try to drop into the pin cups...
 

The AMF dude



Saw this on the back of one of the machines at work. Looks like something you'd find in a box of Lego's, but it has the old amf triangle logo in the middle, just...
 

Transformer smokes

I hava a tarnsformer that started smokeing. I replaced the transformer and it runs a few seconds and starts to smoke again. Any Ideas?...
 

Turret 1-7-10 problem

One of my lanes hasn't been indexing past the 1-7-10 occasionally mainly the 7 pin when they call a 180 we go over and tap the pin down then the turret indexes. Any ideas?...
Working...
X