No announcement yet.

Tips for putting down Kegel Sports Shot Patterns


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • Tips for putting down Kegel Sports Shot Patterns

    I have a sports shot league starting this week, and it's the first time our house is doing it.

    Any tips for laying down these patterns? We have a Kustodian Ion machine. Is there a specific amount of volume I need to put out by adjusting the pump on the machine?

    I did put down the Autobahn last week just to test it, but I'd like to make sure that I'm doing everything correctly. I stripped the lanes, then ran strip+conditioner.

  • #2
    I would suggest "burning" 4 lanes with the sport shot and then start your conditioning. This will help get the old pattern out of the brush. There is no volume amount regarding sport patterns, just ratios. You can go to our pattern library use the filters on the left to dial in a pattern. Be sure to pick the "Single tank" option.
    let me be myself


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Ball Returns Shorted Out?

    Ok, I just had one of my company's centers in Florida reach out for help with this issue, and I wasn't able to help them over our chat, so I'm hoping you guys can help shed some...

    Trip rocker arm

    What causes the trip rocker arm to not line up with the trip rod? Carriage tubing is not bent and all eccentrics are brand new.
    I understand I can bend the rocker arm a...

    Lower ball cushion board

    Just wondering if this is the normal way that these boards go over time? Am i missing something?
    Pit curtains are in "reasonable" condition if that means anything...

    Backend motor plug

    What is the name of the power plug and socket on the back-end motor?

    Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....

    82/70 combi motors

    Hi guys, got a few of these Lewus solid state start switches and wondering if we could make use of them on our combi motors. I've seen they aren't recommended for combi motors...

    Deck lowering hook cam follower lever

    I have a machine that has broken the cam follower arm for the deck lowering hook on the 2 to 1 twice in a couple weeks. I've overnighted the part so i can change it tomorrow....