Announcement

Collapse
No announcement yet.

Kegel Terrain

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kegel Terrain

    Been messing around with kegel element patterns which call for all terrain or blended terrain/current, terrain/ice depending on how the kegel pattern is written. Ive heard rumors of putting out house patterns with terrain and only using a forward pass. When I asked "Theres no way you can have enough volume doing this is there?" I was told more units with terrain make it hook more and that less is better. Does that make sense?

  • #2
    Terrain is the highest viscosity conditioner on the market. I have run a couple of tournaments using forward only and there was plenty of oil. The thicker viscosity of Terrain slows the ball down, and does play a little more "Hooky" A house pattern using only Terrain would definitely have a lot of hook. The properties of Terrain also help it hold onto the lane, which fights carry down and results in the backends staying dryer.
    let me be myself

    Comment


    • #3
      Sounds too good to be completely true. Must be a super expensive conditioner too.
      Where's Mrs. Pisses?
      And where's my son, Schmuugar?

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Black Consoles

      I got tired of the black consoles braking and they look bad.so I made my own....
       

      Deck knocking pins over on new racks (Need help ASAP)

      I am still very new to working on a2s first off.

      We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
       

      Express Model B 40 lanemachine

      Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
       

      82-70 Distributor belt pulling to the side.

      I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
       

      82-90 XLi Pin Elevator

      I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
      I'm...
      Working...
      X