Announcement

Collapse
No announcement yet.

Prodigy vs Navigate

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Prodigy vs Navigate

    I see that alot of you in the Midwest and East use Prodigy Lane Conditioner... How well does it play on ProLane? Carrydown?
    We currently use Navigate and it seems to move alot.
    Guess what?! I got a fever, and the only prescription... is more cowbell!

  • #2
    I think Prodigy is the best oil for Prolane.....it is what I use

    Comment


    • #3
      Navigate is a touch "slicker" so the carry down can be a little more noticeable than with Prodigy. Logic also works well on Prolane
      Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
      Cleaner: Fabuloso Spring Fresh with Bleach Alternative
      Cloth: ShamWow!
      Machine: Johnny 5
      Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

      Comment


      • #4
        Originally posted by shamefowjze View Post
        Navigate is a touch "slicker" so the carry down can be a little more noticeable than with Prodigy. Logic also works well on Prolane
        We used to use Logic, but with the new Walker, we are obligated to use Kegel conditioner to extend the warranty. We might give Prodigy a try.
        Guess what?! I got a fever, and the only prescription... is more cowbell!

        Comment


        • #5
          Out of the Kegel oils, Prodigy would be the best choice, Navigate a very close second.
          Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
          Cleaner: Fabuloso Spring Fresh with Bleach Alternative
          Cloth: ShamWow!
          Machine: Johnny 5
          Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

          Comment


          • #6
            Prodigy is a good oil on low friction surfaces. In fact, I've used it on wood with moisture cure urethane until the heads blew out with good success. It is easy to tweak and causes fewer machine and spotting issues than most oils.

            Comment


            • #7
              I quit using Prodigy in both places that I had a choice.
              First place had a problem with the balls feeling slimey after just a few frames, and my ball calls more than doubled with all the yo-yo's. Went down to a reasonable number after switching to Infinity.
              Second place was more of the same, but not quite as many ball calls because of it. Still too many, but went down significantly after changing to Brunswick Command
              You don't have to be crazy to do this job...But it helps!

              Comment

              Topic Starter RibbonScript

              Collapse

              Adsense Classic 2

              Collapse
              widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
               

              Table cutting off before the end of the cycle

              I have one lane that has been giving me trouble lately. It used to be every once in awhile but now it is happening every cycle. Start 1st ball cycle, sweep drops does the usual...
               

              ETU diagnostic tool

              I've posted before about wanting to try and figure out how to fix these trigger boards we have. I'm trying to map the thing out and create a schematic, but it's slow going, especially...
               

              Gutter Straps

              Hey everyone, I hope someone can direct me in the right direction. I'm looking to find either a part number or someone willing to part with some.gutter straps. I have plastic...
               

              AMF 82-90XL BE Gearbox seals part number cross reference.

              I have spent a few hours cross checking part numbers for my 82-90xl's Back end gearboxes. I have found that most auto part stores carry these seals for a fraction of the price...
               

              Roller Clutch issue

              Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
               

              Another pivot bearing broke.

              One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
              Working...
              X