Announcement

Collapse
No announcement yet.

Looking For Patterns for an older Phoenix 6 Wick Pad Machine

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking For Patterns for an older Phoenix 6 Wick Pad Machine

    I was wondering if there was anyone who had some different patterns I can put into our Phoenix 6 pad macine. We have inherited this machine and would like some ideas on some patterns that can be used with it. the manual it came with really didn't have much in it and was curious if people were familiar with this model of oiler.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

A2 1 to 1 Gear Box Cover Replacement Due to Crack

I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
 

Streamlane Mask Halo Lights

With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


...
 

Baddest Tool Chest In Town

Adios, motor boater!

...
 

Aluminum Repair and Welding

with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
http://aluminumrepair.com/...
 

Setting Table Harness Connections

Hi, guys.

We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
 

check this jam...

the ball stuck the table up

...
Working...
X