Announcement

Collapse
No announcement yet.

pheonix 8 pad

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pheonix 8 pad

    here is a shot that I need to add a little to.. This is mainly for open play where they are close to the head pin but not very consistant..I am looking to build this shot just a little, so that anyone that knows what they are doing and hook the ball can have a decent shot.. maybe lenghten a few feet? Not familiar with a pad machine so thats why I am here.. also.. Is it possible to put PBA animal shots on a pad machine, and is it really necessary to let it sit on the lane for 15 min to soak up the oil?

    here is the shot:

    Clean and oil (same time)
    oil only dust (yes)
    pattern distance 35'
    forward shift 2nd 01
    '' '' 3rd 02
    '' '' high 35
    forward pad 8R 0036
    7R 0036
    6R 29'
    5R 29'
    1L 0036
    2L 0036
    3L 29'
    4L 29'
    Reverse Shift Down 3rd 08
    2nd 02
    Low 01

    Rev 8R 0000
    7R 0000
    6R 8'
    5R 8'
    1L 0000
    2L 0000
    3L 8'
    4L 0

    Add oil pad 8 (0) 7(0) 1 (0) 2 (0)
    Distance between hits (6')

  • #2
    Clean and oil (same time)
    oil only dust (yes)
    pattern distance 39'
    forward shift 2nd 01
    '' '' 3rd 02
    '' '' high 35
    forward pad 8R 0036
    7R 0060
    6R 31'
    5R 31'
    1L 0036
    2L 0060
    3L 31'
    4L 31'
    Reverse Shift Down 3rd 08
    2nd 02
    Low 01

    Rev 8R 0000
    7R 0000
    6R 18'
    5R 18'
    1L 0000
    2L 0000
    3L 18'
    4L 18

    Add oil pad 8 (0) 7(0) 1 (0) 2 (0)
    Distance between hits (6')

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    MP Chassis Tester

    Good morning,
    I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
    I am using relays. My question is to anyone that may...
     

    Preventative Maintenance - As, Jets, A2s - LEDs

    Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.

    www.ledsupply.com...
     

    4:1 Timing off..

    *sigh* Hello friends..

    I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
     

    Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.

    Left a rant about this in the bowling forum…

    I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
     

    Turret clutch rebuild

    At what thickness do you replace the clutch face.
    Is there a minimum dimension from the clutch face to the rivet.

    Thanks...
     

    Solderless relay conversion

    Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
    Working...
    X