Announcement
Collapse
No announcement yet.
king your thoughts please
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
king your thoughts please
city tour this week like to tweek shot , using phenix s tour mach w/ smoothing pads , infinity oil , def=c , 6to1 mix, on my leagues with 5-man teams my shot is scoring well plays alittle on the dryer side,but ball reaction and carry is good ,,,,2-2-3@14, 8-8-2@18, 10-10-22@18, 11-11-3@22, 12-12-2@22, 13-13-1@22, 2-2-0@22 OIL TO 41 FEET, 2-2-0@ 26 BACK TO33, 13-13-1@22, 12-12-3@22, 11-11-2@18, 10-10-2@18, 8-8-1@14, 2-2-0@14, SORRY DONT KNOW HOW TO LINE SET MY TYPING, THINKING OF JUST ADDING A 10-10 AND A 8-8 ON THE REVERSE TO GET MOR DURABILITY FOR SINGLES/DOUBLES WHATS YOUR THOUGHTS AND THANX FOR YOUR TIME MULTI-TASK SORRY ALMOST FORGOT 5 YEAR OLD HPL LANESTags: None
-
There you go. To line type just hit your enter key at the end of the line and the cursor will drop to the next line. Are you running @ 40 or 50 mic?
2-2-3@14
8-8-2@18
10-10-2@18
11-11-3@22
12-12-2@22
13-13-1@22
2-2-0@22 to 41 feet
reverse
2-2-0@26 to 33 feet
13-13-1@22
12-12-3@22
11-11-2@18
10-10-2@18
8-8-1@14
2-2-0@26
Last edited by MOJOJOJO; 01-17-2013, 02:01 PM.
-
2-2-2@18
7-7-1@18
9-9-2@18
10-10-3@18
11-11-2@22
12-12-3@22
2-2-0@22 33 to 41 feet
reverse
2-2-0@26 to 33 feet
13-13-1@22
12-12-2@22
11-11-3@18
9-9-2@18
8-8-1@14
2-2-0@14 10-0 feet
Volume
@ 40 - 19.04ml
@ 50 - 23.8ml
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
MP Chassis Tester
Good morning,
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
Preventative Maintenance - As, Jets, A2s - LEDs
Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.
www.ledsupply.com...
www.ledsupply.com...
4:1 Timing off..
*sigh* Hello friends..
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.
Left a rant about this in the bowling forum…
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
Turret clutch rebuild
At what thickness do you replace the clutch face.
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Solderless relay conversion
Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
Comment