Announcement

Collapse
No announcement yet.

per my PM

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • per my PM

    Per my PM message I will save the reasoning for this.... Here is the pattern.

    defence c 4:1
    offense hv
    40mic
    40ft
    34 reverse

    2 2 10
    8 1 10
    9 2 10
    10 2 10
    11 2 14
    12 3 14
    13 2 18
    2 0 30 23.3-40

    2 0 26 40-34
    13 1 18
    12 3 18
    11 3 14
    10 4 14
    9 1 10
    8 1 10
    2 0 10 7.3-0

    I think my previous pattern was 45mic that might be where my problem lies.

  • #2
    That pattern looks pretty good for wood and a K+

    2 2 10
    7 1 10
    9 2 10
    10 2 10
    11 2 14
    12 3 14
    13 2 18
    2 0 30 23.3-40

    2 0 26 40-34
    13 1 18
    12 3 18
    11 3 14
    10 3 14
    9 2 10
    7 1 10
    2 0 10 7.3-0

    If you need more longevity/hold - I made some slight changes

    Thanks for reposting!

    Comment


    • #3
      Should I go back to 45mic?

      Comment


      • #4
        Just re read your PM - you can get a better lengthwise taper with a higher pump setting by getting the oil on the lane - 40 requires slow speeds and does not get as much down in the heads.

        I like this better:

        45 mic stream
        40'
        2-2 2 14
        7-7 1 14
        9-9 2 14
        10-10 4 14
        12-12 3 18
        13-13 1 18
        2-2 0 22 25-40

        2-2 0 26 40-34
        13-13 1 22
        12-12 2 18
        11-11 1 18
        10-10 3 14
        9-9 2 14
        8-8 1 14
        2-2 0 10 9-0

        22.255

        I also did not on the forward run cleaning at 30ips or the jump in speed from 18-30 and in reverse the jump from 30-18ips

        I like the speeds to have a more gradual change

        Let me know how this plays - it is in my Kosi

        Thanks!

        Comment


        • #5
          Last night we had a traveling scratch league on this pattern that usually produces over 18 700 with like 4 honor scores. Well there was only 3 guys over 700. Guys say the pattern played really short. balls hooking at the darts.... any tweeks to get this playable?

          Comment


          • #6
            45 mic stream
            41'
            2-2 2 14
            7-7 1 14
            9-9 2 14
            10-10 4 14
            12-12 3 18
            13-13 1 18
            2-2 0 22 25-41

            2-2 0 26 41-35
            12-12 1 22
            11-11 3 18
            10-10 4 18
            9-9 2 14
            8-8 1 14
            2-2 0 10 8-0
            RBD 37'
            Volume 23.67

            Comment


            • #7
              I do not have Drop Brush...

              Comment


              • #8
                Gotcha - I widened the pattern significantly for more hold and lengthened it a foot

                Comment


                • #9
                  Thanks ill see how it plays the next couple days and let you know how it goes!! Thank you

                  Comment


                  • #10
                    Plays pretty good the first 6 frames then carries down and bowlers move right by 3 frame of second game the track is going by the beginning of the third game the pattern is brutal. I am lost.. I am about to go to the stupid mentality and open the gutter up and dump a puddle in the middle. Seems like it works for the guy down the road using a pad machine. this pattern has 24 mls how is that not enough ughhhhhhhhh

                    Comment


                    • #11
                      Ok

                      More volume means more carry down

                      This is pattern has better taper and less in the heads for less carry down

                      One more foot of buff for more hold

                      45 mic stream
                      42'
                      2-2 2 14
                      7-7 1 14
                      9-9 2 14
                      10-10 2 14
                      11-11 3 18
                      12-12 1 18
                      2-2 0 22 21-42

                      2-2 0 26 42-35
                      12-12 2 22
                      11-11 3 18
                      10-10 2 18
                      9-9 2 18
                      8-8 1 14
                      2-2 0 14 9-0

                      Volume 21.015
                      Last edited by 8270king; 03-02-2013, 12:33 AM.

                      Comment


                      • #12
                        The slipperier they are at the beginning, and after the people move right everyone is in the same place and it lasts 6 frames. (then junk) tell the King what the straight shooter have and the crankers have so he can get an idea of what is up. (remenber that each pair is different every week because of the equipment on the pair.

                        Comment

                        Topic Starter RibbonScript

                        Collapse

                        Adsense Classic 2

                        Collapse
                        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
                         

                        MP Chassis Tester

                        Good morning,
                        I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
                        I am using relays. My question is to anyone that may...
                         

                        Preventative Maintenance - As, Jets, A2s - LEDs

                        Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.

                        www.ledsupply.com...
                         

                        4:1 Timing off..

                        *sigh* Hello friends..

                        I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
                         

                        Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.

                        Left a rant about this in the bowling forum…

                        I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
                         

                        Turret clutch rebuild

                        At what thickness do you replace the clutch face.
                        Is there a minimum dimension from the clutch face to the rivet.

                        Thanks...
                         

                        Solderless relay conversion

                        Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
                        Working...
                        X