Announcement

Collapse
No announcement yet.

stripper not spraying

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • stripper not spraying

    Need help have older kustodian and everything works except it's not spraying stripper

  • #2
    If the pump is turning on and off as it shpuld and you have no pressure then the diaphragm inside the pump has probably failed.
    Factory & Converted A-2 (US, Ger, Jap)
    Comscore ECT, Matrix & DuoHD
    Walker B, Sanction Standard, Original K, Flex Walker & Ikon
    Kegel C.A.T.S

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Help-broken Part

    my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
     

    Qubica VDB Battery Replacement Part 2.

    Greeting all.
    I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
    Thanks for looking.
    Bolton454
     

    Pin Damage

    I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
     

    Making TDM's adjustable.

    I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
     

    Gold Crown Masking Unit

    Here are some photos of a Brunswick Gold Crown single masking unit that I refurbished. I stripped off the old orange vinyl skin and used it to make a template for the new green...
    Working...
    X