Announcement

Collapse
No announcement yet.

Vinyl Track Repair Insert

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vinyl Track Repair Insert

    Use with 53-520095-14 to replace short sections.

    https://www.thingiverse.com/thing:5525840
    Attached Files
    Factory & Converted A-2 (US, Ger, Jap)
    Comscore ECT, Matrix & DuoHD
    Walker B, Sanction Standard, Original K, Flex Walker & Ikon
    Kegel C.A.T.S

  • #2
    Well done

    Comment


    • #3
      WOW. What tools did you use to make these inserts so accurately? They look like they were factory made by Brunswick. Impressive!

      I was working in a center at one point where the vinyl tracks had chunks missing that would cause lighter balls (6 to 8 lbs.) to bounce around and bop the lane frames, slowing them down too much by the time they hit the carpeted tracks to come up the power lift. We deemed that not to be a big enough nuisance, so nobody replaced the vinyl rails in the end.
      Where's Mrs. Pisses?

      Comment


      • #4
        Thanks. Just 3D printed. These were printed in ASA but you can use nylon.
        Factory & Converted A-2 (US, Ger, Jap)
        Comscore ECT, Matrix & DuoHD
        Walker B, Sanction Standard, Original K, Flex Walker & Ikon
        Kegel C.A.T.S

        Comment


        • #5
          Dont have those subway tracks, but I can see where that would be very useful.

          Comment


          • #6
            Originally posted by Kanga (James) View Post
            Thanks. Just 3D printed. These were printed in ASA but you can use nylon.
            What is ASD?

            Looks like it would beat bit of timber dowel?

            Comment


            • #7
              ASA is much like ABS but is less prone to warping while printing.

              Should definitely beat a dowel.
              Factory & Converted A-2 (US, Ger, Jap)
              Comscore ECT, Matrix & DuoHD
              Walker B, Sanction Standard, Original K, Flex Walker & Ikon
              Kegel C.A.T.S

              Comment

              Topic Starter RibbonScript

              Collapse

              Adsense Classic 2

              Collapse
              widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
               

              The AMF dude



              Saw this on the back of one of the machines at work. Looks like something you'd find in a box of Lego's, but it has the old amf triangle logo in the middle, just...
               

              Transformer smokes

              I hava a tarnsformer that started smokeing. I replaced the transformer and it runs a few seconds and starts to smoke again. Any Ideas?...
               

              82-90 XLi Pin Elevator

              I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
              I'm...
              Working...
              X