Announcement

Collapse
No announcement yet.

Phoenix pad vac motor

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Phoenix pad vac motor

    Gentlemen:
    Wondering if anyone knows the Grainger number for the vac motor on a Phoenix pad machine, number PX8-2021.
    Thanks in advance.
    Roscoe
    rfm

  • #2
    Re: Phoenix pad vac motor

    2m201 I think that is right, I know it is for the Phoenix X

    http://www.grainger.com/Grainger/items/2M201
    Peanut

    Comment


    • #3
      Re: Phoenix pad vac motor

      You might call a local vaccum cleaner store. We get ours there for a fraction of the brunswick cost. Exact same motor.
      John

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse

      Related Topics

      Collapse

       

      Stahl's "Tuffy Super Jam Stopper" in action!

      So I decided to try a few of these, I mean the idea totally makes sense and recently I saw these in action and liked what I saw.

      Basically, it's meant as an extension...
       

      Roller Clutch issue

      Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
       

      Pictures of new machines being installed...

      Here are the accelerators and pits that came with the lanes, kickbacks, gutters, power lifts.



      This a new way of building the supports for the lanes...
       

      Baddest Tool Chest In Town

      Adios, motor boater!

      ...
       

      check this jam...

      the ball stuck the table up

      ...
      Working...
      X