Doing lanes this morning and walker got up to lane 13 and decided it didnt wanna play ball anymore, decided to drive right off the pin deck, ended up about an inch away from from cushion plank, checked the forward subtract , it was on 29 where it always is, managed to drag that heavy S.O.B out and get it back to the approach, re do #13 and went fine. So my question is, what the hell would cause it to drive right off the pindeck??
Announcement
Collapse
No announcement yet.
Only the once, but stil??
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Only the once, but stil??
Hi guys,
Doing lanes this morning and walker got up to lane 13 and decided it didnt wanna play ball anymore, decided to drive right off the pin deck, ended up about an inch away from from cushion plank, checked the forward subtract , it was on 29 where it always is, managed to drag that heavy S.O.B out and get it back to the approach, re do #13 and went fine. So my question is, what the hell would cause it to drive right off the pindeck??AS REQUESTED....The all new and VERY improved "super cool" Pin_Head with super hip shades.....Tags: None
-
possible sticking forward drive relay. You could switch it with another relay of the bunch and see if problem goes away. If you don't have the gold contact variety of relay, then get them ( I think they say Au somewhere printed on them).Nick
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
MP Chassis Tester
Good morning,
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
Preventative Maintenance - As, Jets, A2s - LEDs
Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.
www.ledsupply.com...
www.ledsupply.com...
4:1 Timing off..
*sigh* Hello friends..
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.
Left a rant about this in the bowling forum…
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
Turret clutch rebuild
At what thickness do you replace the clutch face.
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Solderless relay conversion
Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
Comment