Announcement
Collapse
No announcement yet.
Qubicaamf Visclean
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Qubicaamf Visclean
I recently received a starter kit of Vis clean bowling lane cleaner concentrate from Qubica A.M.F and was wondering if anyone has used the product before? If so what are the pro's and cons of the cleaner? Currently we are using Brunswick's Invincible Lane cleaner in our Kustodian Lane Machine. Currently we are using Syn-Pro S-26 and W-40 Mixed Half and Half.Tags: None
-
That We are Indeed. By mixing them it gives us about a 33 weight lane oil. Which seems to run fine in our Kustodian. We were using control by brunswick for awhile then after we ran out we still had some lane concepts oils and mixed them together and that is what we are currently Using.
Comment
-
I used VisClean a few years back , I didnt mind it as such alothough nothing I'd rave about.... alothough 1000x better than Formula ACC.... Haven't used Invincible we had Judge for a while and found it was eating away the Neoprene tubing in the cleaner pump so we have now gone back to Defense C..AS REQUESTED....The all new and VERY improved "super cool" Pin_Head with super hip shades.....
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
MP Chassis Tester
Good morning,
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
Preventative Maintenance - As, Jets, A2s - LEDs
Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.
www.ledsupply.com...
www.ledsupply.com...
4:1 Timing off..
*sigh* Hello friends..
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.
Left a rant about this in the bowling forum…
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
Turret clutch rebuild
At what thickness do you replace the clutch face.
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Solderless relay conversion
Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
Comment