Announcement

Collapse
No announcement yet.

Screen recoat/resurfacing lanes

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Screen recoat/resurfacing lanes

    Just out of curiosity....how often do you either, screen and recoat, or resurface your lanes. (for those who still have wood lanes)

    We screen and recoat every year, will resurface next year depending on how they look after this season. Last resurface was 98.

    Just thought I'd see what other centers do....

    kc

  • #2
    Re: Screen recoat/resurfacing lanes

    Half our house is still wood. We're a 64 lane center split. 1-32 is synthetic and 33-64 is wood. The wood lanes are screened every year and cut every 4. Same as you, last time we cut was 98 and we will have them cut next summer.

    Rep [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]
    All I want in life is to turn wrenches and climb around pinsetters/pinspotters again :/

    Comment


    • #3
      Re: Screen recoat/resurfacing lanes

      Screen/coat every year, cut every 3rd year. We're going synth this year, so that mess is gonna be over with for good [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img] [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

      Kevin

      Comment


      • #4
        Re: Screen recoat/resurfacing lanes

        It depends on the lineage and type of finish on the lanes. Average lineage can get by with a screen and recoat once a year, but a high lineage house should have a head recoat at mid season. If you have water base you probably should do a head recoat no matter how much lineage.

        You should resurface between 3 to 5 years, depending on maintenance and how well the lanes are holding up.

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Black Consoles

        I got tired of the black consoles braking and they look bad.so I made my own....
         

        Deck knocking pins over on new racks (Need help ASAP)

        I am still very new to working on a2s first off.

        We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
         

        Express Model B 40 lanemachine

        Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
         

        82-70 Distributor belt pulling to the side.

        I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
         

        82-90 XLi Pin Elevator

        I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
        I'm...
        Working...
        X