Electrical and Electronics Discussion

Topics	Statistics	Last Post
Closed: Accelerator motor spontaneously runs in reverse by Mr. Blister Started by Mr. Blister, 12-19-2022, 08:30 PM	1 response 77 views 0 likes	Last Post by Kanga (James) 12-20-2022, 08:12 AM
Funk foul line sensor with the GS-X pinnseter by hABIB1102 Started by hABIB1102, 12-06-2022, 02:51 AM	2 responses 55 views 0 likes	Last Post by hABIB1102 12-07-2022, 01:25 AM
Japanese A-2's: converting 2A ,5A, and 1.5A (Powerlift) fuses to breakers by Mr. Blister Started by Mr. Blister, 11-19-2022, 04:33 AM	2 responses 51 views 0 likes	Last Post by Mr. Blister 11-20-2022, 05:53 AM
New ZOT (or related) problem by Sky Lanes Started by Sky Lanes, 09-21-2022, 12:35 PM	13 responses 134 views 0 likes	Last Post by Sky Lanes 09-24-2022, 09:50 AM
Zot triggers by Sky Lanes Started by Sky Lanes, 08-30-2022, 05:10 PM	4 responses 86 views 0 likes	Last Post by Sky Lanes 09-06-2022, 02:06 PM
Aiphone NEM-30A, no incoming call ringer tone by DBZodos Started by DBZodos, 03-28-2022, 06:16 PM	3 responses 82 views 0 likes	Last Post by DBZodos 04-29-2022, 11:30 AM
Anybody recognize this type of switch? by Sky Lanes Started by Sky Lanes, 02-02-2022, 04:14 PM	3 responses 149 views 0 likes	Last Post by Sky Lanes 02-04-2022, 07:16 PM
Brunswick NEXGEN I/O Board part specs? by Vincent05 Started by Vincent05, 12-25-2021, 02:14 PM	2 responses 125 views 0 likes	Last Post by Mike Wilson 01-08-2022, 11:56 AM
Overhead monitor repair by obdll Started by obdll, 12-21-2021, 09:35 AM	2 responses 105 views 0 likes	Last Post by mickeygm 12-25-2021, 08:10 AM
Frame work Intercom system by Jonnyboy7770 Started by Jonnyboy7770, 12-14-2021, 09:11 PM	1 response 70 views 0 likes	Last Post by Wookie8662 12-15-2021, 10:12 PM

Previous 1 2 3 4 11 50 template Next

No topics found.

Mark This Channel Read

How do you track stops?

by Mike Wilson

How do you track machine stops and malfunctions?...

We don't 15.18%	34
Stop sheet or notebook at bench 46.43%	104
Stop sheet at Pinsetter/Pinspotter 16.07%	36
Computer / Software 19.64%	44
Other 2.68%	6

Channel: Bowl-Tech Polls

03-25-2021, 05:53 PM

Black Consoles

I got tired of the black consoles braking and they look bad.so I made my own....

Deck knocking pins over on new racks (Need help ASAP)

I am still very new to working on a2s first off.

We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...

Express Model B 40 lanemachine

Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.

82-70 Distributor belt pulling to the side.

I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...

82-90 XLi Pin Elevator

I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
I'm...

If you can not agree to any of these terms of use above or are not at least 18 years of age you are asked NOT to visit Bowl-Tech or utilize its content. To visit the Bowl-Tech Terms of Service and Rules CLICK HERE

Announcement

Electrical and Electronics Discussion

TOTY

Latest Poll

Adsense Featured 2

Black Consoles

Deck knocking pins over on new racks (Need help ASAP)

Express Model B 40 lanemachine

82-70 Distributor belt pulling to the side.

82-90 XLi Pin Elevator

Adsense Classic 2