No announcement yet.



Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • M.p.chassis

    Need to replace circuit board contact in p 1.
    can I get new contacts and how do I get old ones out.
    Attached Files
    just when you think you have seen it all

  • #2
    There's a tool for that, but I don't have the info on it. If you use a small blade screwdriver with a lot of patience you should be able to pop it out. Steal one from an unused spot, like a sparemake path light if it's not being used.
    I've had enough of hope & chains.


    Topic Starter RibbonScript


    Adsense Classic 2


    Related Topics



    Stahl's "Tuffy Super Jam Stopper" in action!

    So I decided to try a few of these, I mean the idea totally makes sense and recently I saw these in action and liked what I saw.

    Basically, it's meant as an extension...

    Roller Clutch issue

    Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...

    Pictures of new machines being installed...

    Here are the accelerators and pits that came with the lanes, kickbacks, gutters, power lifts.

    This a new way of building the supports for the lanes...

    Baddest Tool Chest In Town

    Adios, motor boater!


    check this jam...

    the ball stuck the table up