No announcement yet.



Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • Wookie8662
    You are probably at the mercy of Intercard.
    Nothing available for self support in USA.
    Everything I do, I have to go thru intercard support.
    Even changing out a swiper, now need to call support, due to new firmware needed.
    Its a pain.

    I never had that problem with Imbed.
    Could change any parts out (swiper - wifi radio - controller - remote antenna), upload graphics, etc no problem.

    Leave a comment:

  • kryley
    started a topic Intercard


    Howdy all,

    We've recently (in the last 18 months or so) completely refurbed our arcade area and have installed the Intercard game card system on all of our arcade machines.

    The problem is, there is really only one company "down under" that deal with Intercard and they're not all that easy to get information out of.

    Do any of you American folk (where I'm assuming the system is more widely used) have any form of documentation on anything to do with Intercard?? iReader wiring diagrams, manuals for the software etc etc...

    It's nothing major, I just like to have something I can refer back to if it all goes down the toilet!

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Black Consoles

I got tired of the black consoles braking and they look I made my own....

Deck knocking pins over on new racks (Need help ASAP)

I am still very new to working on a2s first off.

We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...

Express Model B 40 lanemachine

Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.

82-70 Distributor belt pulling to the side.

I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...

82-90 XLi Pin Elevator

I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.