Mike
Announcement
Collapse
No announcement yet.
Air Cleaners
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Re: Air Cleaners
We have 6 of the units mentioned above. they have been installed for 4 years and we have not had a problem with them. I change the pre-filter once per week, the activated charcoal filter every 3 months and the HEPA filter once per year. The service has been good, they send reminders when the HEPA filters are due. The filters that they supply are a little costly, and I have found comparable filters in the Grainger book. Overall I think they are an 8 on the 1-10 scale. (17 on the 1-20 scale) LOL
billmanlet me be myself
-
Re: Air Cleaners
Bill:
What did you have before them, and how do they compare to the electrostatic units ... E.G. Smokeeters???
Thinking of doing this myself, as the smokeeters seem to always get dirty when it's 15 degrees out, making pressure washing an unpleasant experience. :P
Anyone have the honeywell units??? They seem somewhat pricey, but a comparison to the less expensive units from pollution research would be valuable in making a decision.
Kevin
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
Black Consoles
I got tired of the black consoles braking and they look bad.so I made my own....
Deck knocking pins over on new racks (Need help ASAP)
I am still very new to working on a2s first off.
We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
Express Model B 40 lanemachine
Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
82-70 Distributor belt pulling to the side.
I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
82-90 XLi Pin Elevator
I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
I'm...
I'm...
Comment