Announcement

Collapse
No announcement yet.

Center Stage Ball racks

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Center Stage Ball racks

    We recently got the Brunswick center stage ball racks and hoods. That being said, we have the length wise tilts all correct, balls all roll towards the back.The issue we now seem to be having is the left/right balance.We can get them balance and get a 50/50 with balls going left/right.......but eventually balls all end up going to one side and when this happens if there are 6 balls on one side the 7th ball hits the front most one and rolls back towards the mouth. Any suggestions? We have used shim paper to get the balance.
    Ignorance is Bliss!

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X