Announcement

Collapse
No announcement yet.

Frameworx tall chairs

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • drhookmec
    replied
    Originally posted by Ted View Post
    Yikes! They're supposed to be grade 5!
    Would probably help if bowlers wouldn't slam there balls down on them too.
    Might try to find some grade 8 bolts and maybe a bigger size.
    Right now i have the holes for the screws drilled all the way through the ring
    and i'm using 10-24 Mach screws with kep nuts on them.

    Leave a comment:


  • Ted
    replied
    Yikes! They're supposed to be grade 5!

    Leave a comment:


  • drhookmec
    replied
    Originally posted by Ted View Post
    Have you tried locktight on the screws?
    Yes, Trying that now and haven't had any with red locktite come loose.
    But now it seams instead of coming loose the screws just break.

    Leave a comment:


  • Ted
    replied
    Have you tried locktight on the screws?

    Leave a comment:


  • drhookmec
    started a topic Frameworx tall chairs

    Frameworx tall chairs

    Anyone else having the same issue as me with these tall FX chairs?

    The foot rest rings keep coming loose.

    And in my opinion should really be welded on.

    Has anyone with these tall chairs come up with a fix for this?
    Or have any ideas?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X