No announcement yet.

Distributor sticking


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Distributor sticking

    Other than the clutch, what are some of the top reasons that the distributor would stick at the number 2 bin while going from 2-4?

  • #2
    Quick update
    while distributor is fully extended and at the head pin,I put a little downward pressure near the trip levers I can feel it want to bind when I push it towards the 7 pin side. Bearing going bad at the mount?


    • #3
      Check your rollers. They might be a bit tight


      • #4
        They all seem to check out ok.
        How in the world would you get the needle bearings out anyway? The one clear at the top? (Or bottom,depending how you're looking at it lol)


        • #5
          Search blind hole bearing puller.
          Prevent the problems. Don't do crash repairs.

          Drywall in a bowling center: Recipe for disaster.


          • #6
            If you have a waffle-belt the belt is touching the iron tube that holds the distributor sides together.


            Topic Starter RibbonScript


            Adsense Classic 2

            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

            Help-broken Part

            my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...

            Qubica VDB Battery Replacement Part 2.

            Greeting all.
            I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
            Thanks for looking.

            Pin Damage

            I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...

            Making TDM's adjustable.

            I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...

            Gold Crown Masking Unit

            Here are some photos of a Brunswick Gold Crown single masking unit that I refurbished. I stripped off the old orange vinyl skin and used it to make a template for the new green...