Announcement

Collapse
No announcement yet.

Another league night - another problem

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another league night - another problem

    Hi again guys!

    This time round the finger cells on a lane don't want to pick any pins up.

    When you push the finger cells shut by hand they just spring back to open.

    Is it likely that one of the cells is jammed? or is it a spring stuck somewhere? or maybe a rod?

    Thanks for any help you can give again

  • #2
    Originally posted by mnorwell View Post
    Hi again guys!

    This time round the finger cells on a lane don't want to pick any pins up.

    When you push the finger cells shut by hand they just spring back to open.

    Is it likely that one of the cells is jammed? or is it a spring stuck somewhere? or maybe a rod?

    Thanks for any help you can give again
    Take the carb link off the cells one at a time, you will find what cell. If all carb links are off and it still does it look for something binding.

    Comment


    • #3
      Started taking carb links off, got to the 5 pin cell and it closed without the link on. A nut had become wedged between the cell assembly and the long table links

      Thanks for the idea

      Comment


      • #4
        Hmmmm,

        Check all the cell pivot pins as well as they get bent and also give this type of problem.
        82-70's
        Computor Score
        Elco/Omega Tec
        PBL's
        Express CE Oxyshock/Versitity
        16 Wood
        No pindication

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse

        Related Topics

        Collapse

         

        A2 1 to 1 Gear Box Cover Replacement Due to Crack

        I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
         

        Streamlane Mask Halo Lights

        With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


        ...
         

        Baddest Tool Chest In Town

        Adios, motor boater!

        ...
         

        Aluminum Repair and Welding

        with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
        http://aluminumrepair.com/...
         

        Setting Table Harness Connections

        Hi, guys.

        We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
         

        check this jam...

        the ball stuck the table up

        ...
        Working...
        X