088-001-286 FE Motor Brake 90 XLi

xli brake for motor

by Drillmn300

Is there an aftermarket for this yet, I am burning them up about every 3-4 months and only having 6 of them in my stock is getting old? I have not taken one apart yet to see if...
- Channel: AMF Pinspotters 82/70 Through XLi EDGE
06-27-2006, 02:01 PM
need help with Quality motor

by jim k

quality comb motor model # m4c17DZ10H replacement for national motor.
i' m trying to help out another center with this motor head, 1 has a round start switch from lewus...
- Channel: AMF Pinspotters 82/70 Through XLi EDGE
12-03-2010, 01:11 PM
Help we need motor savers

by Talladega_A2_TEK

We are looking for motor savers, we have absolutely no idea where to locate them

THANKS
- Channel: Pinsetters Brunswick A-A2
04-17-2007, 04:33 PM
Motor Mount Modification kit

by eddieg

Hello Guys,
I replaced a pinsetter motor yesterday on one of my A2s and the holes for the motor only matched up to 2 sides of the motor mount! I have ever had this happen,...
- Channel: Pinsetters Brunswick A-A2
07-31-2012, 12:49 PM
Need Some Help

by Hopper

Can anyone tell me where I can find a new drive motor for The AMF Overlane Return (power check)? This is the motor for the ball return wheel not the hand dryer. The part number...
- Channel: AMF Pinspotters 82/70 Through XLi EDGE
11-18-2007, 09:56 AM

Deck Lift Gear Damaged

Starting Issue, Random Cycling of Pinsetter
Noticed that the Rake Crank Arm had a jerk/stutter on 2nd pass of 4 phase movement. Hand cranked to movement point and felt solid...

Streamlane Mask Halo Lights

With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.

...

Baddest Tool Chest In Town

Adios, motor boater!

...

Aluminum Repair and Welding

with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
http://aluminumrepair.com/...

Setting Table Harness Connections

Hi, guys.

We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...

check this jam...

the ball stuck the table up

...

If you can not agree to any of these terms of use above or are not at least 18 years of age you are asked NOT to visit Bowl-Tech or utilize its content. To visit the Bowl-Tech Terms of Service and Rules CLICK HERE

Announcement

088-001-286 FE Motor Brake 90 XLi

Adsense Classic 1