Announcement

Collapse
No announcement yet.

Looking for a part number??

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pin_Head
    replied
    Thank brother thats him!!! Stupid me looked at my old manuals didnt have it BUT when I looked at my XLi manual after you mentioned the 90's manual there she is, thanks again mate..

    Leave a comment:


  • dothan
    replied
    found what i think your looking for. In the 90's book. page 5-4 item 36. 000-021-528. Hope this helps

    Leave a comment:


  • Pin_Head
    started a topic Looking for a part number??

    Looking for a part number??

    Hi Folks,
    I am after a part number that I can't seem to find in the book, it is the saddle block that the main sweep pivot shaft (070-003-106) sits on and has the U-Bolt pass through it to secure the pivot shaft.... I am changing out some stuffed shafts and have some rather dodgy looking blocks....


    Cheers Brett...

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X