Announcement

Collapse
No announcement yet.

distributor nipples

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • distributor nipples

    So here I sit with the part numbers straight out of the Qubica/AMF catalog as follows:

    070-011-173 for the Ball stud 9/16
    070-011-172 for the Ball stud 7/16

    What in the world has a 9/16 sized clip for the ball stud there? it says it goes on the trip arm there and after some measuring all the studs we have are no where close to 9/16 including the respot cells and both nipples on the distributor trip cable. so what's the deal here?
    When you know what to do, everything is easy.

  • #2
    The 9/16" and 7/16" refer to the cable pivot stud length. The longer one goes on the index lever. The shorter one on the trip rocker arm weldment.

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Table cutting off before the end of the cycle

    I have one lane that has been giving me trouble lately. It used to be every once in awhile but now it is happening every cycle. Start 1st ball cycle, sweep drops does the usual...
     

    ETU diagnostic tool

    I've posted before about wanting to try and figure out how to fix these trigger boards we have. I'm trying to map the thing out and create a schematic, but it's slow going, especially...
     

    Gutter Straps

    Hey everyone, I hope someone can direct me in the right direction. I'm looking to find either a part number or someone willing to part with some.gutter straps. I have plastic...
     

    AMF 82-90XL BE Gearbox seals part number cross reference.

    I have spent a few hours cross checking part numbers for my 82-90xl's Back end gearboxes. I have found that most auto part stores carry these seals for a fraction of the price...
     

    Roller Clutch issue

    Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
     

    Another pivot bearing broke.

    One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
    Working...
    X