No announcement yet.

Um, that wasn't a strike


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Um, that wasn't a strike

    Saw this happen during open play at the end of the night: guy leaves the 3, 6, 7, 10 and the scoring gave him a strike and sent the machine through a strike cycle. Ive seen this happen sparodically before, but the sweep always just ran through without stopping at first guard; tonight the sweep stopped at guard like normal. Any ideas on what caused this scoring hiccup? AccuScore+ and MP Chassis
    In search of the C2B plug

  • #2
    I have the exact same setup as you and I have seen this bug also! But it only seems to show on the lanes with the LED board chassis,again it is very rare but those are the lanes where it will happen.
    Another odd thing that it will do that is odd is those same lanes will run a long cycle on a strike once in about forever.
    70's MP/PBL/LBS,Q-Score
    Prolane Walker sport


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

    Prolane damage

    Can this be repaired?

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...