No announcement yet.

surpik part number


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • surpik part number

    looking for a part number for the piks. sorry i am not technical on names but it is the weldment that has the upper pulley and the motor drive pulley on it. had the upper bearings crap out and ate into the shaft. cant find a book around here with a part number for this piece. any help with the part number would be greatly appreciated. thanks
    watch out, they're everywhere!

  • #2
    Call Casey or Craig at Grad Prix, They'll help you find it.

    Did you look next to the compressor? There was an extra back there on the wall.

    We leave our greatest mark on this earth with the quality of our craftsmanship.


    • #3
      i haven't called yet it was 7pm last night and they were closed. looked by the compressor and not there. figured i could save some time by having the number for casey but guess ill have him look for it today.
      watch out, they're everywhere!


      • #4
        The number for the upper shaft is: 190-001-357.
        Necessity IS NOT the mother of invention. Laziness IS the mother of invention.


        • #5
          got it ordered thank you for the information
          watch out, they're everywhere!


          Topic Starter RibbonScript


          Adsense Classic 2

          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

          Well this is a first.

          We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

          Ball return wheel guide roller removal.

          Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

          Even old mechanics find something new.

          All my years working on these things I never had this happen…… until last week. ...

          82-90XL Frontend Gearbox Parts - Rebuild Woes

          We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

          Prolane damage

          Can this be repaired?

          LED Ball Lights

          Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...