Announcement

Collapse
No announcement yet.

rubber rivets

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rubber rivets

    Does anyone else remember when rubber rivets
    were two pieces? Really! The rubber rivet
    used a seperate leather washer and then you
    installed it in the usual manner.

    ------------------
    "Gun control is the policy of tyrants"
    Rep. Rob Bishop (R-UT)

  • #2
    Re: rubber rivets

    I used them as little as 3 years ago. Have not checked if they are still available. They were great for repairing those one piece cushions when the bolts pulled thru, and the cushion sagged, usually in the middle capturing the pins! I still have some left!!
    I may not always be right, but I am never wrong.

    Comment


    • #3
      Re: rubber rivets

      I still use the rubber rivets, and they are also loads of fun to play-fight with. they really sting at close range.

      Comment


      • #4
        Re: rubber rivets

        I still use the rubber rivets, and they are also loads of fun to play-fight with. they really sting at close range.

        Comment


        • #5
          Re: rubber rivets

          I still use the rubber rivets, and they are also loads of fun to play-fight with. they really sting at close range.

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Black Consoles

          I got tired of the black consoles braking and they look bad.so I made my own....
           

          Deck knocking pins over on new racks (Need help ASAP)

          I am still very new to working on a2s first off.

          We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
           

          Express Model B 40 lanemachine

          Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
           

          82-70 Distributor belt pulling to the side.

          I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
           

          82-90 XLi Pin Elevator

          I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
          I'm...
          Working...
          X