Announcement

Collapse
No announcement yet.

respot cell gripper pads.

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • respot cell gripper pads.

    I need to get my hands on the original AMF extruded rubbber gripping pads somewhere. the amf number for the part is:030-008-542: thanks to all who reply...by the way these are designed perfect...the hold alot better then pads cut out of a sponge.

  • #2
    Re: respot cell gripper pads.

    hi,
    over here in oz we can get extruded pads from our eastern bowling distributor.
    good luck.
    len.
    Regards,

    Len.

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Rake sweeping out of time, and pin launching onto lane.

    I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
     

    Strange sweep problem

    I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
     

    GSX Distributor shaft bearings

    Two part topic:
    1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

    2. ANY of these bearings with the black support mount...
     

    The Legacy of the A2

    I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
     

    Table turning on short stroke.

    Hello dear Bowltech members.
    First let me say thank you for your time. am plagued by a big issue for three weeks now.
    our technician is working full time on another...
     

    Another pivot bearing broke.

    One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
    Working...
    X