Announcement

Collapse
No announcement yet.

8270 Pinsetter

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 8270 Pinsetter

    I HAVE AN 8270 THAT GETS POWER TO THE TABLE &
    POWER TO THE SWEEP BUT IT WILL NOT SWITCH AUTOMATICALLY!CAN ANY ONE OFFER SOME TIPS!
    THANKS

  • #2
    Re: 8270 Pinsetter

    Need more detail about your equipment:

    Auto Scoring? Brand?
    MP Chassis? SS Chassis?

    If MP Chassis, check your M1 relay. A bad M1 relay or socket will cause this problem.
    The purpose of the M1 relay is to heat up T1 (Transformer 1) which in turn allows power to the Sweep and Table Contactors (low voltage only 24V) If you can run the S & T contactors by hand, it sounds like no power getting to T1 or a failing M1. Might be also a broken line in your A&MC box, which allows for completed circuit to fire M1.

    Good Luck!

    Kat
    "Where are we going, and why are we in a hand basket?"

    --Kat

    Comment


    • #3
      Re: 8270 Pinsetter

      i'll go with kat on that, definately m relay related, hated to ask a silly question, have you checked the fuses???
      i don't need mods, i am a bloody genius

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Black Consoles

      I got tired of the black consoles braking and they look bad.so I made my own....
       

      Deck knocking pins over on new racks (Need help ASAP)

      I am still very new to working on a2s first off.

      We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
       

      Express Model B 40 lanemachine

      Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
       

      82-70 Distributor belt pulling to the side.

      I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
       

      82-90 XLi Pin Elevator

      I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
      I'm...
      Working...
      X