Announcement

Collapse
No announcement yet.

pin orientor rod

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pin orientor rod

    Masternut,

    On those pictures, I noticed that you pin orientor rod is bent. Mine are all straight.
    Why did you bend it ? Also you machines look very clean!!

    king

  • #2
    Re: pin orientor rod

    The black pin holder(ejector)whatever...was bent to help hold the butt first pins in the pocket better esp. on the modifided kidneys(pin guides).
    Your guide modification is working great.
    Thanks again.
    Peanut
    Peanut

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Stahl's "Tuffy Super Jam Stopper" in action!

    So I decided to try a few of these, I mean the idea totally makes sense and recently I saw these in action and liked what I saw.

    Basically, it's meant as an extension...
     

    Roller Clutch issue

    Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
     

    Pictures of new machines being installed...

    Here are the accelerators and pits that came with the lanes, kickbacks, gutters, power lifts.



    This a new way of building the supports for the lanes...
     

    Baddest Tool Chest In Town

    Adios, motor boater!

    ...
     

    check this jam...

    the ball stuck the table up

    ...
    Working...
    X