king
Announcement
Collapse
No announcement yet.
Humpback / PBL benefits
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Humpback / PBL benefits
After running some humpbacks for about a year and a half I think we have another benefit over kickers. With the ball door rings on both pbl and hump I believe it makes the carpets last much longer becausr the balls do not idle at the ball door nearly as much. What do you guys think ?
kingTags: None
-
Re: Humpback / PBL benefits
I think a kicker exit with a filler plate kit between the bounce boards would make a carpet last longer. If no filler plate kit I would lean towards the PBL because it surrenders easier to the ball and has a locking drive to drive out stray pins.
Jonas
Comment
-
Re: Humpback / PBL benefits
I know that in the past I have kind knocked the Hump Back system, not becaue of design but it's cost and being as new on the market as it is but I recently spoke to Life Long Product's and they informed me that the belt has a 10 year warrenty on the surface of the belt. That make's a big differance in accepting the cost!
Ed
------------------Please buy MADE IN USA!
Comment
-
Re: Humpback / PBL benefits
Lampie, go to <a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank"><a href="http://www.bowlingproducts.cc" target="_blank">http://www.bowlingproducts.cc</a></a></a></a></a></a></a></a></a></a> and if I spelled it right that should take you to the company that is responsible for the HUMPBACK!
Ed
------------------Please buy MADE IN USA!
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
Black Consoles
I got tired of the black consoles braking and they look bad.so I made my own....
Deck knocking pins over on new racks (Need help ASAP)
I am still very new to working on a2s first off.
We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
Express Model B 40 lanemachine
Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
82-70 Distributor belt pulling to the side.
I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
82-90 XLi Pin Elevator
I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
I'm...
I'm...
Comment