Announcement

Collapse
No announcement yet.

82/70 Distributor Supports

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 82/70 Distributor Supports

    Anyone out there prefer the newer style (C machines & newer) distributor support channels over the older support castings with the tube? I'm converting (or reverting) my C's to the older ones which were present on all B machines. Some have the long tube that goes all the way to the front of the pit (suicide bar) and some have shorter tubes for machines with the cross bar over the cushion. I'm willing to swap my newer style ones WITH posts for just the castings with tubes, no posts. You can reply in this thread or E-mail. THANKS!

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Approach Wear - DBA IQ/Anvilane

Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
Working...
X