Announcement

Collapse
No announcement yet.

Bored too

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bored too

    I want to know why the suppliers call us up, ask what type of pinspotters (or pinsetters) we have and then send us catalogs for the type we DON'T have? Seems like by sending what we have, they might save on printing costs and hold down the costs of parts.
    TOON
    Gene Simmons for president!!!

  • #2
    Re: Bored too

    That's true. I always get catalogs for AMF and Brunswick. My supplier makes these notebooks every year to give to there customers and they make them all the same. So that means I have to flip thru the B stuff to get to the AMF and Vantage stuff. The Brunswick stuff is always in the front because Terry has B machines in his centers and he likes them better.
    Give me a hammer and some duct tape and I can fix it!

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Black Consoles

    I got tired of the black consoles braking and they look bad.so I made my own....
     

    Deck knocking pins over on new racks (Need help ASAP)

    I am still very new to working on a2s first off.

    We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
     

    Express Model B 40 lanemachine

    Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
     

    82-70 Distributor belt pulling to the side.

    I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
     

    82-90 XLi Pin Elevator

    I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
    I'm...
    Working...
    X