Announcement

Collapse
No announcement yet.

82-90 XL Chassis'?

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 82-90 XL Chassis'?

    Does anyone have any wire diagrams for the 82-90XL small chassis?

    Also looking for replacement LEXON face plates.

    I have 200 82-90 XL's in stock and I have 10 bad chassis as well as some worn face plates.

    Mark

    The early bird gets the worm but the second mouse gets the cheese!

  • #2
    Re: 82-90 XL Chassis'?

    MARK
    you don't need any diagrams for the XL chassis!!
    most of the time it's dust that builds up on the
    IC chip legs and blowing them out doesn't get all
    the build up of stuck on dust between the legs.
    what you need to do is open up the chassis and spray it down with some good strong cleaner and let it sit for a few minutes, then rinse chassis out real good,then while chassis is still good and
    wet power chassis up and remaining dust will be
    blown right out of the chassis and your done. [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img] tell DAVE&DAROLL hello for me.
    if you need anymore help don't hesitate to ask!
    how is GRANDMA DAROLL doing? [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]
    yours truly the old chief flunkey that didn't
    know jack chet. :p GLENN
    if things aren't going right just use a bigger hammer! DIRT

    Comment


    • #3
      Re: 82-90 XL Chassis'?

      Originally posted by CUJO:
      MARK
      you don't need any diagrams for the XL chassis!!
      most of the time it's dust that builds up on the
      IC chip legs and blowing them out doesn't get all
      the build up of stuck on dust between the legs.
      what you need to do is open up the chassis and spray it down with some good strong cleaner and let it sit for a few minutes, then rinse chassis out real good,then while chassis is still good and
      wet power chassis up and remaining dust will be
      blown right out of the chassis and your done. [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img] tell DAVE&DAROLL hello for me.
      if you need anymore help don't hesitate to ask!
      how is GRANDMA DAROLL doing? [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]
      yours truly the old chief flunkey that didn't
      know jack chet. :p GLENN
      <font size="2" face="Verdana, Helvetica, sans-serif">Hey Crud...wont that let the "smoke out"?

      Charlie [img]/content/btubb/images/%%GRAEMLIN_URL%%/wink.gif[/img]
      Please buy MADE IN USA!

      Comment


      • #4
        Re: 82-90 XL Chassis'?

        charlie,
        yep it does and it gets all the CRUD out too!
        that's the fastest way to fix them!!
        no more problems. [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img] CUJO
        if things aren't going right just use a bigger hammer! DIRT

        Comment


        • #5
          Re: 82-90 XL Chassis'?

          Originally posted by Ed Fox:
          Hey Crud...wont that let the "smoke out"?
          <font size="2" face="Verdana, Helvetica, sans-serif">Use nonconductive 'electronics wash' to rinse it out.

          Best stuff I found for general chassis and electronic cleaning is ECG Electronics Wash RX200-20 and ECG Contact Cleaner / Degreaser Wash RX400-20. You can read up on 'em here (You'll need Adobe Acrobat Reader):

          <a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank"><a href="http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf" target="_blank">http://www.nteinc.com/ecgproducts/pdf/chemicals.pdf</a></a></a></a></a></a></a></a></a>

          Stuff works great... I get 'em locally from Wallco Electronics, but many electronics dealers and such should be able to get them, too...
          <span style="font-style: italic">Educatio est omnium efficacissima forma rebellionis</span>

          Comment


          • #6
            Re: 82-90 XL Chassis'?

            my flavor is "Misty Circuit Board Clear II" Sold by Curtis

            Comment


            • #7
              Re: 82-90 XL Chassis'?

              Hey cujo, Dave &amp; Daroll said hi, they asked where you were working and what your number is.

              I have a few chassis that the strike cycle and sweep reverse quit running. Alot of the machines are that way because overseas they do not use them.

              Comment


              • #8
                Re: 82-90 XL Chassis'?

                MARK,
                tell DAVE I'LL call him MONDAY MORNING around 10:00 is that when he usually gets in [img]/content/btubb/images/%%GRAEMLIN_URL%%/confused.gif[/img]
                that's usually when the roach coach showed up.
                is ALEX still there [img]/content/btubb/images/%%GRAEMLIN_URL%%/confused.gif[/img] talk to you
                later GLENN.
                if things aren't going right just use a bigger hammer! DIRT

                Comment


                • #9
                  Re: 82-90 XL Chassis'?

                  Much to my surprise DAVE SHOWED UP EARLY today 8:15 am. Yes Alex is still working for us and doing a fantastic job.

                  Talk to you this morning!

                  Mark
                  909-548-0644

                  Comment


                  • #10
                    Re: 82-90 XL Chassis'?

                    Hi mark I have some diagrams for conctions cable for this chasis if you have some problems some are for dust or bad contact,but you have other problems ,with sweep ,table etc you need check each part inside the chasis ,some pc board are comun for boht lanes but relay electronics it are for each lane ,
                    Iwould like help you
                    thanks
                    jesus lopez
                    bowlmex@bowlingtech.com

                    Comment

                    Topic Starter RibbonScript

                    Collapse

                    Adsense Classic 2

                    Collapse
                    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
                     

                    Rake sweeping out of time, and pin launching onto lane.

                    I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
                     

                    Strange sweep problem

                    I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
                     

                    GSX Distributor shaft bearings

                    Two part topic:
                    1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

                    2. ANY of these bearings with the black support mount...
                     

                    The Legacy of the A2

                    I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
                     

                    Table turning on short stroke.

                    Hello dear Bowltech members.
                    First let me say thank you for your time. am plagued by a big issue for three weeks now.
                    our technician is working full time on another...
                     

                    Another pivot bearing broke.

                    One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
                    Working...
                    X