Announcement

Collapse
No announcement yet.

Swapping 30's with 70's

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BowlEquip
    replied
    Re: Swapping 30's with 70's

    Toon: I have access to three Stearns brakehead motors, all labeled "bad", but knowing who has them, may be just a few minor electrical problems. They tend to replace entire assemblies because they did not understand anything technical. E-mail me if interested; let me know how far south you are.

    Leave a comment:


  • Mas8230
    replied
    Re: Swapping 30's with 70's

    6525's. Sorry

    Leave a comment:


  • toon30s
    replied
    Re: Swapping 30's with 70's

    Sorry man, the 70's are really different. You can use the carpet, bounce board, cushion (must change the hanger tube), and humpies. Nothing else is the same. I might be wrong, but I have heard that the prototype 70's had the smae bach half as a 30. One good thing about the 70's is they come pretty much assembled; the back half, the front half, and the ball return mechanism. What type of 30's do you have? I'm looking for a few 5850 motors and chassis.
    TOON

    Leave a comment:


  • Mas8230
    started a topic Swapping 30's with 70's

    Swapping 30's with 70's

    I'm thinking of pulling some of my 8230's and installing 8270's, but I want to do it in phases. The 30's in question are humpback equipped. My question is: Do I have to change out my entire rear frames? My pits are in excellent shape(new carpets, etc.) I'm not worried about installing the 70's in pieces since I am in an upstairs and they have to come up in pieces anyway. I just wanted to know if I had to go through the extra labor of ripping the 30's rear frames out completely, or if I could build onto them. Any suggestions would be helpful.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X