No announcement yet.

preventive mantinace


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • preventive mantinace

    i am trying to find a "good" preventive maintinace schedule and have found some but dont seem good enought for me i am a perfectionist and like things to be up to my level of operation

    any info is apreciated,
    the high tech redneck!!!

  • #2
    Re: preventive mantinace

    In the AMF book there is a pretty good one. But mostly you should develop your own. Think of what you want done and type it up.

    If you want an example E-Mail me your E-Mail address I have one that is pretty good..

    [email protected]
    Welcome to the Next level!!!!!!!!!


    • #3
      Re: preventive mantinace

      Also try the AMF site they have a preventative maintenance schedule posted there that is by the day, week, month and so on. It's a great place to start anyway. You can even print it off if you like!!

      Sorry I dont know the link to this page.



      • #4
        Re: preventive mantinace

        I agree with developing your own. I too am a perfectionist. I know what needs done and as long as you log your stops and track your work then everything will fall into place.
        Pinspotters do not break down when they are not running!


        • #5
          Re: preventive mantinace

          thanks for the input i think i will develope my own starting with what the amf suggests and go from there i looked at the amf site and it seems good

          the high tech redneck!!!


          Topic Starter RibbonScript


          Adsense Classic 2

          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

          MP Chassis Tester

          Good morning,
          I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
          I am using relays. My question is to anyone that may...

          Preventative Maintenance - As, Jets, A2s - LEDs

          Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.


          4:1 Timing off..

          *sigh* Hello friends..

          I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....

          Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.

          Left a rant about this in the bowling forum…

          I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....

          Turret clutch rebuild

          At what thickness do you replace the clutch face.
          Is there a minimum dimension from the clutch face to the rivet.


          Solderless relay conversion

          Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...