No announcement yet.

safety switch


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • safety switch

    After this tragic accident, I realize that my inovation may be plausible. It saved my middle finger from severe damage or maybe just saved it.
    I work for BRC and a 12 lane independent 8270 house.
    I used to work for 24 lane 8270 house and installed these simple switches on the BE mtr's. They serve to shut off the BE mtr. when there is a turn pan pile up avoiding broken klixon's, bent drive shafts and so on. And as I found out about a year ago when clearing rolling pins by the plow, got my hand too close to the rear roller and sucked in my finger so by reaching up and hitting the switch, saved serious injury since I could not reach the control box. These switches are very cheap and easy to install. If you are interested, contact me or email me. I live near Stahl's. Bill Bockmann
    Yeah but, We've always done it that way.

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

Prolane damage

Can this be repaired?

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...