Announcement

Collapse
No announcement yet.

Curtains

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Curtains

    Who makes a heavy duty curtain?

    2 or 3 of mine have torn when doing the Masternut mod.

    I do not like the pins stuck in the corner.

    Jerry

  • #2
    Re: Curtains

    Me! [img]/content/btubb/images/%%GRAEMLIN_URL%%/wink.gif[/img]

    I'll give you a call.

    Charlie [img]/content/btubb/images/%%GRAEMLIN_URL%%/smile.gif[/img]
    Please buy MADE IN USA!

    Comment


    • #3
      Re: Curtains

      If you have an "old-school" shoe store that still does repairs, you can fix slightly torn curtains, or unraveling seams... the sole-sewing machines have a needle tough enough to punch through several layers of curtain material.

      I had some of ours reinforced, and they've outlived new ones... we had a few that were getting a bit ragged at the edges, but were solid otherwise... I had a 3" strip of carpet sewn to the back of them down the edges... No pins in the corners, and they show no signs of wearing out. I also had some hanger seams restitched, with the same effect. I think it cost us around $25 to have 6-7 curtains fixed... it was well worth it.
      <span style="font-style: italic">Educatio est omnium efficacissima forma rebellionis</span>

      Comment


      • #4
        Re: Curtains

        what has worked for me

        or, cut an old carpet to curtain dimensions.

        or, talk to Charlie and buy something new.

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Rake sweeping out of time, and pin launching onto lane.

        I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
         

        Strange sweep problem

        I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
         

        GSX Distributor shaft bearings

        Two part topic:
        1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

        2. ANY of these bearings with the black support mount...
         

        The Legacy of the A2

        I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
         

        Table turning on short stroke.

        Hello dear Bowltech members.
        First let me say thank you for your time. am plagued by a big issue for three weeks now.
        our technician is working full time on another...
         

        Another pivot bearing broke.

        One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
        Working...
        X