No announcement yet.

Suggestion to Vantage


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Suggestion to Vantage

    Vantage: Was sittin on the can recently and remembered that I had installed a great deal of those universal cushion planks on machines. I love em. Specially now that you added about a 1/4 inch thickness on em. I just have 1 suggestion to you guyz there. Wondering if you could make those flat head screws that hold the rubber cushion support on to hex head screws/bolts? I tear a great deal of them due to the weak metal. I know there isnt a huge amount of stress on that area but it would make the install that much easier then a flat head going into my hand. Thanx...


    p.s. tell EJ that I says hello.
    Well thats just like your opinion man...

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

Prolane damage

Can this be repaired?

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...