Announcement

Collapse
No announcement yet.

F1 Fuse

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F1 Fuse

    We have a chassis that will randomly blow the F1 Fuse. Sometimes it will run 3 months fine and then blow the fuse or sometimes it will only last a week or 2. It happens on different machines, so we are pretty sure it's in the chassis. What would cause the F1 fuse to blow all the time? Anybody ever have this problem?

    Louie
    Experience: Currently Help Maintain 44 82-30s and 50 82-70s.

  • #2
    Re: F1 Fuse

    Experience: Currently Help Maintain 44 82-30s and 50 82-70s.

    Comment


    • #3
      Re: F1 Fuse

      I believe it protects the T1 transformer.

      JK

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
      Working...
      X