No announcement yet.

could use some service help


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • could use some service help

    [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img] I will most likely can my mechanic due to no p/m and seems to stay on the bar stool too long. Anyone out there looking to move to the heart of America - with affordable, easy midwest living should reply by e-mail at or call (402)250-2695. Until then - anyone in this area who would like to commercial service us maybe twice a month can call, too. Have 82-70's with Omega-Tek's that run good. High lineage house with owner that still believes if you fix it right the first time - and take care of it with p/m - it'll run forever. Any help is appreciated.

  • #2
    Re: could use some service help

    This is Frank Costanza....

    I would entertain this possibility, or at least direct you towards someone that may be able to assist you.

    Fever [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img]
    I really enjoy the Simpsons. My problem is that I am starting to look like Homer. Doh!!!


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Black Consoles

    I got tired of the black consoles braking and they look I made my own....

    Deck knocking pins over on new racks (Need help ASAP)

    I am still very new to working on a2s first off.

    We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...

    Express Model B 40 lanemachine

    Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.

    82-70 Distributor belt pulling to the side.

    I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...

    82-90 XLi Pin Elevator

    I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.