Announcement

Collapse
No announcement yet.

HUH?

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HUH?

    [img]http://pic2.****************/VOL26/934456/1718790/23193370.jpg[/img] [img]http://pic2.****************/VOL26/934456/1718790/23193423.jpg[/img]

    What?

    Martin
    So it goes.

  • #2
    Re: HUH?

    Where?

    Comment


    • #3
      Re: HUH?

      Originally posted by 82/70 king:
      Where?
      <font size="2" face="Verdana, Helvetica, sans-serif">Just above the a&amp;mc box, almost between the two chassis.
      So it goes.

      Comment


      • #4
        Re: HUH?

        Looks like someone has routed an active wire from each of the 3 motors of each machine through a separate circuit breaker... interesting.

        Ray
        Ray Jordan
        Cybernetic Solutions/tenpintec
        Australia

        Comment


        • #5
          Re: HUH?

          shine a light
          So it goes.

          Comment


          • #6
            Re: HUH?

            This was the best mod(also on "30's) I have ever made. I did get rid of all those louzy clixons inall the motors and I have good control(HV)on all the motors from the front side.

            Martin
            So it goes.

            Comment

            Topic Starter RibbonScript

            Collapse

            Adsense Classic 2

            Collapse
            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
             

            Black Consoles

            I got tired of the black consoles braking and they look bad.so I made my own....
             

            Deck knocking pins over on new racks (Need help ASAP)

            I am still very new to working on a2s first off.

            We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
             

            Express Model B 40 lanemachine

            Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
             

            82-70 Distributor belt pulling to the side.

            I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
             

            82-90 XLi Pin Elevator

            I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
            I'm...
            Working...
            X