No announcement yet.

Orange AMF Solid State Switch


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Orange AMF Solid State Switch

    I recently ordered a few of these for the Westinghouse combos at my one center. The directions specifically say they can be installed on them along with GE's and National's(which I use at my other place). The problem is that they only give installation instructions for the National motors. Can anyone gimme a quick lesson on how to install these on a Westinghouse combo? Much appreciated [img]/content/btubb/images/%%GRAEMLIN_URL%%/smile.gif[/img]


  • #2
    Re: Orange AMF Solid State Switch

    Geminix, as far as I know they are not designed for the West. combo motors, only the West. backend motors.

    Go with the Stahl's motor start relays, they are the best.

    I do have the Lewis install instructions and they do not include the Westinghouse Combos.
    Pinspotters do not break down when they are not running!


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

    Prolane damage

    Can this be repaired?

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...