Announcement

Collapse
No announcement yet.

What's the best?

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What's the best?

    Been open 3 weeks now, things are beginning to settle down. I would like to know what are some of the better after market parts that you have found for the 82-70 pinspoters. If you can give me the part number, description and manufacturer. Thanks in advance....Bruce

  • #2
    Re: What's the best?

    1. Quick disconnect cushion blocks....put them on the non ball door side - Vantage - V203 I think.

    2. Humpback.

    3. Spring loaded paddle shock - Vantage or AMF.

    4. Dist. Belt - EBN Services.

    5. Cushion facing - EBN services - only upper holes showing - no lower rivet head wear.

    6. Carpet belt - Vantage premium or Stahl's tuffy belt.

    7. Lift rod cover - Stahl's.

    8. Sweep Bar - AMF plastic - use the 090 bracket.

    9. Spotting cup - AMF aluminum - NO LINERS.

    10. Rubber rivets - AMF blue urethane rivet.

    Jerry

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
     

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
     

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...
     

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
     

    Prolane damage

    Can this be repaired?
     

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
    Working...
    X